深圳市禾瑞森实业有限公司
CONCENTRATE ON
INDUCTORS AND POWER SUPPLIES
HOMESWITCHING POWER SUPPLYEnclosed Type Power SupplyEnclosed switching power supply
NEW PRODUCTS SHOW
contact us
KCSF-10W
  • 3C
  • CE
  • ROHS

Features:

·Universal AC input

·Small volume，low weight，high efficiency

·Protections:short circuit/over load/over voltage/over temp

·Cooling by free air convection

·LED indicator for power on

·100% full load burn-in test 

·2 years warranty

 

 

download
ModelKCSF-10-5KCSF-10-9KCSF-10-12KCSF-10-15KCSF-10-24
outputDC voltage5V9V12V15V24V
Voltage tolerance±1%±1%±1%±1%±1%
Rated current2A1.1A1A0.7A0.5A
Current range0~2A0~1.1A0~1A0~0.7A0~0.5A
Rated power10W9.9W12W10.5W12W
Ripple&noise80mvp-p120mvp-p120mvp-p120mvp-p120mvp-p
DCvoltage ADJ.range-9%~+10%±10%±10%±10%±10%
inputVoltage range90~264VAC，125~373VDC
frequency47~63HZ
AC current0.25A/115VAC，0.15A/230VAC
efficiency76%78%79%79%81%
Inrush currentCold start current15A/115VAC，30A/230VAC
Leakage current< 0.25mA/240VAC
protectionoverloadRated output power115%~135% start over load protection
protection type:hiccup mode，auto-recovery after fault condition is removed
Over voltage6.8~8.2V12.6~14.2V15.6~17.8V18.6~20.8V30.6~33.2V
protection type:hiccup mode，auto-recovery after fault condition is removed
Over temperatureWhen temperature of transistor inner node is over150℃, start over temperature protection
protection type:hiccup mode，auto-recovery after temperature become normal
environmentWorking temp,humidity-10℃~+60℃，20%~90%RH
Storage temp,humidity-20℃~+85℃，10%~95%RH non-condensing
Withstand vibration10~500HZ，2G10min/1cycle，period for 60 minutes，each axes
safetyWithstand voltageI/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolated resistanceI/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC
Fit standardSafety standardCompliance to UL1012
EMC standardCompliance to EN55022，CLASSA
othersDimension78*48*21mm(L*W*H)
Weight/packing0.08kg/200pcs/17kg/0.024 m³/0.87CUFT
note1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.

 

KCS10W.png

If you have any enquiry about quotation or cooperation,please feel free to email us at sales@kw-magnetics.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.


Subject:
Name:
Email:
Company Name:
Tel:
Fax:
Country:
Message: