KES-200W-K-WELL TECHNOLOGY

NEW PRODUCTS SHOW

·AC input voltage range selected by switch
·Small volume，low weight，high efficiency
·Protections:short circuit/over load/over voltage
·Cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
·2 years warranty

Model		KES-200-5	KES-200-12	KES-200-15	KES-200-24	KES-200-48
output	DC voltage	5V	12V	15V	24V	48V
	Voltage tolerance	±2%	±1%	±1%	±1%	±1%
	Rated current	40A	17A	13.4A	8.8A	4.4A
	Current range	0~40A	0~17A	0~13.4A	0~8.8A	0~4.4A
	Rated power	200W	204W	201W	211.2W	211.2W
	Ripple&noise	150mvp-p	150mvp-p	150mvp-p	150mvp-p	240mvp-p
	DCvoltage ADJ.range	-9%~+10%	±10%	±10%	±10%	±10%
input	Voltage range	90~132VAC/180~264VAC(selected by switch)，255~373VDC
	frequency	47~63HZ
	AC current	4.5A/115VAC，2.5A/230VAC
	efficiency	79%	85%	85%	87%	88%
	Inrush current	Cold start current40A/115VAC，55A/230VAC
	Leakage current	< 2mA/240VAC
protection	overload	Rated output power110%~150% start over load protection
		protection type:hiccup mode，auto-recovery after fault condition is removed
	over voltage	6.8~8.2V	15.6~17.8V	18.6~20.8V	30.6~33.2V	54.8~56.6V
		protection type:hiccup mode，auto-recovery after fault condition is removed
	over temperature	TSW1detect on heatsink of power transistor≥95℃±5℃, start over temperature protection
		protection type:hiccup mode，auto-recovery after temperature become normal
environment	Working temp,humidity	-20℃~+60℃，20%~90%RH
	Storagetemp,humidity	-40℃~+85℃，10%~95%RH non-condensing
	Withstand vibration	10~500HZ，2G10min/1cycle，period for 60 minutes，each axes
safety	Withstand voltage	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC
Fitstandard	Safety standard	Compliance toUL1012
	EMC standard	Compliance toEN55022，CLASSA
others	Dimension	1999948mm(LWH)
	Weight/packing	0.7kg/24pcs/17.5kg/0.034 m³/1.2CUFT
note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.

If you have any enquiry about quotation or cooperation,please feel free to email us at sales@kw-magnetics.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Subject:	Name: *
Email: *	Company Name:
Tel:	Fax:
Country:
Message:

SEH4212 Inductor

SQR2920 Inductor

SQR2012 Inductor

SQ19C CM Chokes

SQ16C CM Chokes

SQR35L CM Chokes

SQ33L CM Chokes

SQ28L CM Chokes

SEH2508 inductor

SEH1208 Inductor

SQH2018 Inductor

SEH4211 Inductor

SAH1212 inductor

DW180-A ADAPTER