KD-50W-K-WELL TECHNOLOGY

NEW PRODUCTS SHOW

DW180-A ADAPTER

KD-50W

Features:

·AC input voltage range selected by switch
·Small volume，low weight，high efficiency
·Protections:short circuit/over load
·LED indicator for power on
·100% full load burn-in test
·2 years warranty

Model		KD-50A			KD-50B		KD-50C
output	DC voltage	CH1:5V	CH2:12V		CH1:5V	CH2:24V	CH1:12V	CH2:24V
	Voltage tolerance	±2%	+4%~-8%		±3%	+6%~-8%	±3%	+6%~-8%
	Rated current	6A	2A		4A	1.5A	2A	1.2A
	Current range	0.8~6A	0.3~2A		0.8~4A	0.2~1.5A	0.5~2A	0.2~1.2A
	Rated power	54W			56W		52.8W
	Ripple&noise	80mvp-p	100mvp-p		80mvp-p	120mvp-p	100mvp-p	120mvp-p
	DCvoltage ADJ.range	CH1:-9%~+10%
input	Voltage range	90~132VAC/180~264VAC(selected by switch)，255~373VDC
	frequency	47~63HZ
	AC current	1.3A/115VAC，0.65A/230VAC
	efficiency	73%		75%			77%
	Inrush current	Cold start current18A/115VAC，36A/230VAC
	Leakage current	< 2mA/240VAC
protection	overload	Rated output power110%~150start over load protection
		protection type :part layer type current limit，auto-recovery after fault condition is removed
	-----	-----
		-----
environment	Working temp,humidity	-10℃~+60℃，20%~90%RH
	Storage temp,humidity	-20℃~+85℃，10%~95%RH non-condensing
	Withstand vibration	10~500HZ，2G10min/1cycle，period for 60 minutes，each axes
safety	Withstand voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Isolation resistance	I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC
Fit standard	Safety standard	Compliance to UL1012
	EMC standard	Compliance to EN55022，CLASSA
others	Dimension	1599738mm(LWH)
	Weight/packing	0.52kg/45pcs/24kg/0.041m³/1.45CUFT
note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.

If you have any enquiry about quotation or cooperation,please feel free to email us at sales@kw-magnetics.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Subject:	Name: *
Email: *	Company Name:
Tel:	Fax:
Country:
Message:

SEH4212 Inductor

SQR2920 Inductor

SQR2012 Inductor

SQ19C CM Chokes

SQ16C CM Chokes

SQR35L CM Chokes

SQ33L CM Chokes

SQ28L CM Chokes

SEH2508 inductor

SEH1208 Inductor

SQH2018 Inductor

SEH4211 Inductor

SAH1212 inductor

DW180-A ADAPTER