
Features:
·universalACinput
·Small volume,low weight,high efficiency
·Protections:short circuit/over load/over voltage
·LED indicator for power on
·100% full load burn-in test
·2 years warranty
| Model | KT-60A | KT-60B | |||||
| output | DC voltage | CH1:+5V | CH2:+12V | CH3:-5V | CH1:+5V | CH2:+12V | CH3:-12V |
| Voltage tolerance | ±2% | ±6% | ±3% | ±2% | ±6% | ±3% | |
| Rated current | 5A | 2.5A | 0.5A | 5A | 2.5A | 0.5A | |
| Current range | 0.6~5A | 0.2~2.5A | 0~0.5A | 0.6~5A | 0.2~2.5A | 0~0.5A | |
| Rated power | 57.5W | 61W | |||||
| Ripple&noise | 80mvp-p | 100mvp-p | 80mvp-p | 80mvp-p | 100mvp-p | 100mvp-p | |
| DCvoltage ADJ.range | CH1:-9%~+10% | ||||||
| input | Voltage range | 90~264VAC,127~373VDC | |||||
| frequency | 47~63HZ | ||||||
| AC current | 1.8A/115VAC,0.9A/230VAC | ||||||
| efficiency | 73% | 74% | |||||
| Inrush current | Cold start current25A/115VAC,50A/230VAC | ||||||
| Leakage current | < 2mA/240VAC | ||||||
| protection | overload | Rated output power110%~150start over load protection | |||||
| protection type:hiccup mode,auto-recovery after fault condition is removed | |||||||
| over voltage | CH1:115%~135% | ||||||
| protection type:hiccup mode,auto-recovery after fault condition is removed | |||||||
| environment | Working temp,humidity | -10℃~+60℃,20%~90%RH | |||||
| Storagetemp,humidity | -20℃~+85℃,10%~95%RH non-condensing | ||||||
| Withstand vibration | 10~500HZ,2G10min/1cycle,period for 60 minutes,each axes | ||||||
| safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
| Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC | ||||||
| Fitstandard | Safety standard | Compliance to UL1012 | |||||
| EMC standard | Compliance to EN55022,CLASSA | ||||||
| others | Dimension | 159*97*38mm(L*W*H) | |||||
| Weight/packing | 0.56kg/45pcs/26kg/0.041m³/1.45CUFT | ||||||
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. | ||||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||||||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | |||||||
| Subject: |
Name: |
| Email: |
Company Name: |
| Tel: |
Fax: |
| Country: |
|
| Message: |
|