HOMESWITCHING POWER SUPPLYEnclosed Type Power SupplyDIN Rail switching power supply
NEW PRODUCTS SHOW
contact us
KG-45W

Features:

·universalACinputrange
·Small volume,low weight,high efficiency
·Protections:short circuit/over load/over voltage
·Cooling by free air convection
·
can be installed onDINrail:TS-35/7.5or TS-35/15
·LED indicator for power on
·
Suitable for LED lighting and moving sign applications
·100% full load burn-in test
·2 years warranty

 

download
ModelKG-45-5KG-45-12KG-45-24
outputDC voltage5V12V24V
Voltage tolerance±2%±1%±1%
Rated current5A3.5A2A
Current range0~5A0~3.5A0~2A
Rated power25W42W48W
Ripple&noise80mvp-p100mvp-p150mvp-p
DCvoltage ADJ.range-9%~+10%±10%±10%
inputVoltage range90~264VAC,127~373VDC
frequency47~63HZ
AC current1.0A/110VAC,0.55A/220VAC
efficiency75%81%83%
Inrush currentCold start current 20A/115VAC,40A/230VAC
Leakage current< 1mA/240VAC
protectionOver loadRated output power105%~150% start over load protection
protection type:hiccup mode,auto-recovery after fault condition is removed
over voltage6.8~8.2V15.6~17.8V30.6~33.2V
protection type:cut off output voltage,diode clamp
environmentWorking temp,humidity-20℃~+60℃,20%~90%RH
Storage temp,humidity-40℃~+85℃,10%~95%RH non-condensing
Withstand vibration10~500HZ,2G10min/1cycle,period for 60 minutes,each axes
safetyWithstand voltageI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation resistanceI/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC
Fit standardSafety standardCompliance to UL1012
EMC standardCompliance to EN55022,CLASSA
othersDimension78*93*56mm(L*W*H)
Weight/packing0.3kg/48pcs/15.4kg/0.03m³/1.07CUFT
note1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.

 

KG45W.jpg

If you have any enquiry about quotation or cooperation,please feel free to email us at sales@kw-magnetics.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.


Subject:
Name:
Email:
Company Name:
Tel:
Fax:
Country:
Message: