深圳市禾瑞森实业有限公司
CONCENTRATE ON
INDUCTORS AND POWER SUPPLIES
HOMESWITCHING POWER SUPPLYEnclosed Type Power SupplyDIN Rail switching power supply
NEW PRODUCTS SHOW
contact us
KG-75W

Features:

·universalACinputrange
·Small volume，low weight，high efficiency
·Protections:short circuit/over load/over voltage
·Cooling by free air convection
·can be installed onDINrail:TS-35/7.5or TS-35/15
·LED indicator for power on
·Suitable for LED lighting and moving sign applications
·100% full load burn-in test
·2 years warranty

 

download
ModelKG-75-12KG-75-24KG-75-48
outputDC voltage12V24V48V
Voltage tolerance±2%±1%±1%
Rated current6.3A3.2A1.6A
Current range0~6.3A0~3.2A0~1.6A
Rated power76W76.8W76.8W
Ripple&noise100mvp-p150mvp-p200mvp-p
DCvoltage ADJ.range-9%~+10%±10%±10%
inputVoltage range90~264VAC，127~373VDC
frequency47~63HZ
AC current1.6A/110VAC，0.96A/220VAC
efficiency79%81%84%
Inrush currentCold start current 20A/115VAC，40A/230VAC
Leakage current< 1mA/240VAC
protectionOver loadRated output power110%~150% start over load protection
protection type :rated current limit，auto-recovery after fault condition is removed
over voltage15.6~17.8V30.6~33.2V54.8~56.6V
protection type:cutoff output，recovery after restart power
environmentWorking temp,humidity-20℃~+60℃，20%~90%RH
Storage temp,humidity-40℃~+85℃，10%~95%RH non-condensing
Withstand vibration10~500HZ，2G10min/1cycle，period for 60 minutes，each axes
safetyWithstand voltageI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation resistanceI/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC
Fit standardSafety standardCompliance to UL1012
EMC standardCompliance to EN55022，CLASSA
othersDimension55.5*125.2*100mm(L*W*H)
Weight/packing0.6kg/20pcs/13kg/0.046m³/1.64CUFT
note1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.

 

KG75W.jpg

If you have any enquiry about quotation or cooperation,please feel free to email us at sales@kw-magnetics.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.


Subject:
Name:
Email:
Company Name:
Tel:
Fax:
Country:
Message: