| Model | KC-35-12 | KC-35-24 |
| output | DC voltage | CH1:13.8V | CH2:13.4V | CH1:27.6V | CH2:26.5V |
| Voltage tolerance | ±2% | ----- | ±1% | ----- |
| Rated current | 2.0A | 0.5A | 1.0A | 0.3A |
| Current range | 0~2.0A | ----- | 0~1.0A | ----- |
| Rated power | 34.3W | 35.6W |
| Ripple&noise | 120mvp-p | ----- | 120mvp-p | ----- |
| DCvoltage ADJ.range | CH1:11.3~14.9V | CH1:21.3~29.8V |
| | Setup,rise,hold time | 800ms,50ms,80ms/230VAC, 1600ms,50ms,16ms/115VAC |
| input | Voltage range | 90~264VAC，127~370VDC |
| frequency | 47~63HZ |
| AC current | 0.9A/115VAC，0.45A/230VAC |
| efficiency | 81% | 83% |
| Inrush current | Cold start current 25A/115VAC，45A/230VAC |
| Leakage current | < 1mA/240VAC |
| protection | Over load | Rated output power110%~150% start over load protection |
| protection mode: AC charging mode:hiccup mode auto-recovery after fault condition is removed |
| Batteryprotection | 9.5~11V | 20~22V |
| At low voltage | protection mode:cutoff output |
| Function | UPS introduction | long-term online floating charge to battery,high charging efficiency,battery can saturate to more than 90% ,cauto-stop charging when it's full,prevent over charging. Effectively extend battery life,AC/battery auto switch ,no switch time,no need human guard, |
| cold-start ,when there is no AC input ,can use battery start UPS,Meet the user's emergency needs |
| environment | Working temp,humidity | -10℃~+60℃，20%~90%RH |
| Storagetemp,humidity | -20℃~+85℃，10%~95%RH non-condensing |
| Withstand vibration | 10~500HZ，2G10min/1cycle，period for 60 minutes，each axes |
| safety | Withstand voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC |
| Fitstandard | Safety standard | Compliance to UL60950-1 |
| EMC standard | Compliance to EN55022，CLASSB |
| others | Dimension | 111*78*36mm (L*W*H) |
| Weight/packing | 0.3kg/50pcs/16kg/0.027m³/0.96CUFT |
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. |
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
keweisales
LIVE CHAT
